Paraflex umbrellas are different from the standard patio umbrellas. They are usually mounted on impermanent arms rather than being mounted on a pole. Additionally the cantilever arms are normally mounted on external walls to hang over the patio and to offer shade that can be easily moved from one angle to another of the patio. Paraflex umbrellas are made from heavy material and it needs strong hardware to mount on the wall so as to prevent it from falling off.

The following are steps on how to mount a paraflex umbrella:

Hold up the mount to the specific area on the wall you want to place it. It needs to however be at least ten inches from a window or the door and approximately 71 inches away from the ground. It is important to also ensure that the actual mount is straight and vertically with the level. In order for you to get the right measurements and the right position, you should draw a line all along the bottom of the mount specifically where it will be located with a marker. Then mark the areas that the mount will be attached. Then, drill where you have marked and then hammer the pegs into the area drilled.

The next step is to remove the pegs. In order to protect the mount on the wall, you need to position the mount against the wall and put back the pegs. To ensure that the mount is firmly place on the wall, you need to make the pegs tighter with a ratchet. You can then take away the lever from the under arm mount. After that, you can now undo the bolt with the right tool for instance a ratchet and glide the bottom mount to the side. Then slide the arm mount into the right place so as the gears perfectly match up. Then slide the bottom parts of the mount then tighten the bolt using the ratchet and then replace the lever. Finally, tighten all the loose bolts on the arm and ensure that it is securely placed.

The last and very important step is to slip the lever on the umbrellas arm into the right place. Then glide the umbrella arm on the track up or down until you get the right position you want it to be. After this procedure, you can now open the umbrella hold using the lever. You can now put the bottom of the umbrella shaft into the grip and with the help of the lever; you can close the hold and secure the umbrella. You can also fine-tune the umbrella placement using the levers found at the base by bending the hold on the arm.

In summary, in order for you to fully benefit from using your paraflex umbrella, you need to get one that is made from high quality material. In case you find it hard to mount it on your won, it is advisable to seek the help of a professional who will mount it perfectly for you. Make sure it is mounted in the right place to give you the shade and comfort you need.